This is the most resistant way wiper series. Manufactured in high quality polyurethane and stainless steel. Especially indicated for very tough working conditions, where there are large quantities of shavings and coolant.
Stainless steel profile
Polyurethane lip with heat-welded joint angles
Excellent resistance to abrasion, acids, oils, and coolants. High resistance to hydrolysis and microorganisms.
Continuous thermal resistance of 100ºC.
Maximum resistance of 135º C
Adapted and welded to blueprint
Assembled in 1,000 and 2,000 mm. strips
Independent supply
Red, black, or blue lip
Special double lip hydrostatic guides (ABH)
Stainless steel profile
AB-5
AB-1
AB-3
AB-H
AB-0
AB-2
AB-R0 AB-R2
AB way wipers with blue polyurethane
AB way wipers with red polyurethane
The AB way wiper series is made with high-quality, resistant welding.
Manufactured with heat-welded polyurethane joints and mooring holes, upon request by the client.
Available in two types of finishes: shiny stainless steel and satin stainless steel.
With the possibility to mix profiles of different heights so as to adapt to any type of guide.
We repair the entire series of AB way wipers, replacing polyurethane lips and deteriorated zones of parts.
Sandwich way wipers, consisting of stripped steel or laser-cut stainless steel and a special polyurethane plate 2 or 3 mm thick.
Resistant to abrasion, coolants, oils, and high temperatures.
Pack assembled with countersunk screws.
Way wipers sheathed in stainless steel and NBR, good resistance and durability, easy to adapt, great resistance to abrasion, oils, coolants, etc. Continued thermal resistance 100º and maximum 135º. Adaptable without welding.
LMX
LMX-F
| H | S | W | T | U | Length | |
|---|---|---|---|---|---|---|
| LMX | 28 mm | 21,5 mm | 6 mm | 10 mm | – | 500 mm |
| LMX-F | 28 mm | 21,5 mm | 6 mm | 10 mm | 25 mm | 500 mm |
Way wipers consisting of anodised aluminium profile and blue polyurethane lip, high-quality hardness 85.
Adjustable to plan by means of fasteners.
The LA way wiper series has a variant with a special stainless steel pre-scraper for areas with a great quantity of hot shavings (LA-F).
Example of a part manufactured with LA profile on blueprint with fasteners.
|
H |
S |
W |
T |
Length |
|
|---|---|---|---|---|---|
|
LA 18×4,5 |
18 mm | 14 mm | 4,5 mm | 7,5 mm | 1.000 mm |
|
LA 25×4,5 |
25 mm | 21 mm | 4,5 mm | 7,5 mm | 1.000 mm |
|
LA 18×7 |
18 mm | 14 mm | 7 mm | 10 mm | 1.000 mm |
|
LA-25×7 |
25 mm | 21 mm | 7 mm | 10 mm | 1.000 mm |
|
H |
W |
T |
Length |
|
|---|---|---|---|---|
|
LA-F 18×7 |
18 mm | 10 mm | 15 mm | 1.000 mm |
|
LA-F 25×7 |
25 mm | 10 mm | 15 mm | 1.000 mm |
We repair the LA series, replacing the blue polyurethane lips and deteriorated aluminium zones.
Way wipers consisting of anodised aluminium profile and double vulcanised NBR or FPM lip.
Designed for sweeping in the forward and back position, with high resistance to wear, oils, coolants, and shavings.
For high-speed machines, the variant with the FPM lip is recommended.
Adjustable with interior joint plates.
Supply to blueprint or 1,000 mm strips.
At Scuder Way Wipers, located in Gipuzkoa, Basque Country, we have large, modern facilities, designed to offer excellent, quality, and punctual service in delivering your orders.
Way wipers for
Way wipers for
Español